 |
|||||||
|
|||||||
|
|
|||||||
|
|||||||
|
|
| SP486CT资料 | |
|
SP486CT PDF Download |
|
File Size : 116 KB
Manufacturer:SIPEX Description:The ICS clock generator is a slave/receiver, I2C component. It can read back the data stored in the latches for verification. Read-Back will support Intel PIIX4 "Block-Read" protocol. The data transfer rate supported by this clock generator is 100K bits/sec or less (standard mode) The input is operating at 3.3V logic levels. The data byte format is 8 bit bytes. To simplify the clock generator I2C interface, the protocol is set to use only "Block-Writes" from the controller. The bytes must be accessed in sequential order from lowest to highest byte with the ability to stop after any complete byte has been transferred. The Command code and Byte count shown above must be sent, but the data is ignored for those two bytes. The data is loaded until a Stop sequence is issued. At power-on, all registers are set to a default condition, as shown. |
|
| 相关型号 | |
| ◆ ADP3335ARMZ-5 | |
| ◆ LTC4414EMS8 | |
| ◆ LTC1968CMS8 | |
| ◆ LTC1871EMS | |
| ◆ LTC3548AEMSE | |
| ◆ LTC1412CG/IG | |
| ◆ LTC1562IG | |
| ◆ LTC1562CG | |
| ◆ AD7705BRZ | |
| ◆ ADM3053BRWZ | |
| 1PCS | 100PCS | 1K | 10K | ||
| 价 格 | |||||
|
型 号：SP486CT 厂 家：SIPEX 封 装：SOP-16 批 号：07+ 数 量：1100 说 明：100%真实库存，原装，部分现货 |
|||||
|
运 费： 所在地：深圳 新旧程度： |
|||||
| 联系人：陈小姐 |
| 电 话：0755-83605789 |
| 手 机：13428979109 |
| QQ：656259901,307704921 |
| MSN：chenqiongxia18@126.com |
| 传 真：0755-23816523 |
| EMail：656259901@qq.com |
| 公司地址： 广东深圳市福田区华强北（振华路）赛格高科德电子市场A1848室 |
