 |
|||||||
|
|||||||
|
|
|||||||
|
|||||||
|
|
| MC10ELT22DR2资料 | |
|
MC10ELT22DR2 PDF Download |
|
File Size : 116 KB
Manufacturer:ON Description:Overcharge detection output pin NPN transistor open collector output; normally high impedance, goes to L level on overdischarge Overcurrent detection pin Monitors equivalent load current through source-drain voltage drop of discharge-controlling FET, and at or above the overcurrent detection voltage sets the DCHG pin to "H" and turns off the discharge-controlling FET. Following overcurrent detection, current is passed from this pin, and if the load is decreased, the overcurrent mode is canceled. Through this action there is a temporary consumption current (at the VCC pin) of approx. 1 mA on resumption of discharge and detection of overdischarge. This function is disabled in overdischarge mode. Pin driving the discharge-controlling FET (P-ch) Normally "L"; on overdischarge set to "H" Output pin for overdischarge detection signals Overdischarge detection pin When the overdischarge detector detects overdischarge at the open collector output of the NPN transistor, this pin is turned on. A delay is provided by setting a dead time until discharge ends, so that by utilizing a reset or other signal from a CPU or some other controlling device, the equipment can be put into standby mode. Pin to set the dead time for overdischarge detection By connecting a capacitor between the CDC pin and GND, a dead time can be set. Pin to set the dead time for overcurrent detection Pin to set the dead time for overcurrent detection By connecting a capacitor between the COL pin and GND, a dead time can be set. If NC, protection is triggered in a short amount of time; the dead time should be set according to the application. Pin to set the dead time for overcharge detection By connecting a capacitor between the COV pin and GND, a dead time can be set. Pin to switch the cell voltage monitor on/off GND: monitor on, VCC: monitor off The cell voltage monitor converts the different cell voltages to a GND- reference voltage and outputs it from the ML, MM and MH pins. |
|
| 相关型号 | |
| ◆ ADP3335ARMZ-5 | |
| ◆ LTC4414EMS8 | |
| ◆ LTC1968CMS8 | |
| ◆ LTC1871EMS | |
| ◆ LTC3548AEMSE | |
| ◆ LTC1412CG/IG | |
| ◆ LTC1562IG | |
| ◆ LTC1562CG | |
| ◆ AD7705BRZ | |
| ◆ ADM3053BRWZ | |
| 1PCS | 100PCS | 1K | 10K | ||
| 价 格 | |||||
|
型 号：MC10ELT22DR2 厂 家：ON 封 装：SOP-8 批 号：07+ 数 量：38350 说 明：100%真实库存，原装，部分现货 |
|||||
|
运 费： 所在地：深圳 新旧程度： |
|||||
| 联系人：陈小姐 |
| 电 话：0755-83605789 |
| 手 机：13428979109 |
| QQ：656259901,307704921 |
| MSN：chenqiongxia18@126.com |
| 传 真：0755-23816523 |
| EMail：656259901@qq.com |
| 公司地址： 广东深圳市福田区华强北（振华路）赛格高科德电子市场A1848室 |
